You put the key in the ignition, try to turn it, and it won’t budge. Or it turns partway and stops. A key that won’t turn is a common problem, and the cause is usually one of a handful of things. Some you can fix yourself in seconds; others need a locksmith. Here’s how to tell the difference.
Quick fixes to try first
1. The steering wheel is locked
This is the most common cause by far. When a car is switched off with the wheels turned, the steering lock engages and holds the ignition too. Fix: gently turn the steering wheel left and right while turning the key at the same time. You’ll feel the lock release.
2. The car isn’t in Park
On automatic cars the key often won’t turn (or come out) unless the shifter is fully in Park. Move the shifter firmly into Park, or try Neutral, and try again.
3. You’re using the wrong key
It happens: a house key or the key from another car on the same ring. Check that it’s the right key, the right way up if it’s not a two-sided key.
4. Cold weather
In a Chicago winter, moisture inside the ignition or door lock can freeze. Warming the key in your hand or carefully with warm (not hot) air can help. Avoid spraying random oils into the ignition, because they attract dirt and make the problem worse later.
Problems that need a professional
5. A worn key
Keys wear down over years of use, and the cuts eventually stop lining up with the pins inside the ignition. Signs: the key wiggles, works only if you jiggle it, or a spare key works fine while your everyday key doesn’t. The fix is a freshly cut key made to the factory specification, not a copy of the worn one. A locksmith can cut a new key by code and program it to your car. Learn more about car key replacement.
6. A bent or damaged key
Using the key to pry something open, or leaving a heavy keyring hanging from the ignition, can bend the blade. Don’t try to bend it back and force it, because it can snap off inside the ignition. Get a replacement cut instead.
7. A worn or damaged ignition cylinder
The pins and springs inside the ignition wear out too, especially on high-mileage cars or when a heavy keyring has been pulling on it for years. If even a new key won’t turn, or the key turns but the car doesn’t respond, the ignition cylinder is probably the issue. It can usually be repaired or replaced on site without towing the car.
8. A broken key stuck in the ignition
If part of the key snapped off inside the ignition, stop and don’t try to start the car with what’s left. A locksmith can extract the broken piece and make you a new key.
What not to do
- Don’t force the key harder. That’s how keys snap off inside the ignition.
- Don’t use pliers on the key head.
- Don’t spray WD-40 or heavy oil into the ignition. If anything, a locksmith may use a dry graphite lubricant made for locks.
Get help in Chicago
If the quick fixes don’t work, Car Keys Pro’s mobile technicians can diagnose the problem at your car, cut a new key, extract a broken key, or repair the ignition in one visit anywhere in Chicagoland. We’re open 7 days a week, 8am–8pm. If you’re thinking about skipping the key altogether, read about push start conversion kits. Call 312-522-1302 and tell us your year, make and model.
Frequently asked questions
The most likely causes are a worn key or a worn ignition cylinder. Try a spare key. If the spare works, your main key is worn and needs replacing.
Yes. Forcing a worn key over time can wear the ignition faster. Replacing the key early is usually cheaper than repairing the ignition later.
In most cases, yes. A mobile automotive locksmith can repair or replace the ignition at your car.
Only with a product made for locks, such as dry graphite. Oils like WD-40 can attract dirt and gum up the pins over time.